User`s guide

User’s Guide Rockhopper 3 Extreme
CHAPTER 4 : PERIODICAL MAINTENANCE
41 AP-75198– Rev. 1.2
4.1.2 Every 2 weeks maintenance
4.1.2.1 C lea ning th ew ipers
Step 1 : Power ON the printer and go to the WiperClean-Menu, DONT press enter when in it.
This will cause the unlocking of the carriage.
Step 2 : Clean the wipers (3) with a polyknit wiper (2), use some Eco solvent cleaning liquid to remove
drops of ink.
Caution
It is recommended to wear gloves as shown on the picture below.
Step 3 : Press the [ENTER] key in the active display (=WiperClean menu)
The head will cap in and be locked.