User`s guide

User’s Guide Rockhopper 3 Extreme
CHAPTER 4 : PERIODICAL MAINTENANCE
38 AP-75198– Rev. 1.2
4.1 DONE BY END USER
Important
In case of working with another type of Mutoh ink than described in this manual, refer to the
dedicated instruction sheet added to the ink kit.
This section describes the periodical services required for this machine. The periodical services ensure
stable printout quality of the machine. In the periodical services, some service parts may be checked,
cleaned, or replaced.
Perform periodical inspections according to the table below.
N° Action Frequency
1 Clean wipers
weekly
2 Clean the edges of the caps in maintenance station
3 Clean the area around the caps
4 Clean around bottom of the heads
5 Replace spitting box sponge
monthly
6 Change the wipers
7 Change absorbent behind maintenance station every 6 months
Notes
The machine starter kit, delivered with the printer, contains items to perform the periodical
maintenance (except for cleaning liquid).
If running out of the necessary maintenance equipment, a user maintenance kit can be ordered.
This kit contains all items to perform the periodical maintenance.
Depending on the ink you are currently using, order the correct cleaning liquid.
Notes
Above maintenance cycle is based on use:
8 hours / day, 5 days / week and 44 weeks / year.
If machine is used more, maintenance periods will come earlier.