User`s guide

User’s Guide Rockhopper 3 Extreme
CHAPTER 2 : PRODUCT OVERVIEW
24 AP-75198– Rev. 1.2
Notes
Avoid the following temperature and humidity conditions. Otherwise, printed images may appear
differently from what you expect:
± Places where sudden changes in temperature and humidity are expected, even though the
condition is within the range written above.
± Places where direct sunlight or excessive lighting are expected.
± Places where air conditioners blow directly.
MUTOH recommends that the printer should be installed where air conditioning can be adjusted easily.
2.4.2 Working space
Install the product on a flat surface that fulfils the following conditions.
a = 1500mm
b = 1500mm
c = 2500mm
d = 600mm
e = 1250mm