User`s guide

User’s Guide Rockhopper 3 Extreme
CHAPTER 7 : TROUBLESHOOTING
132 AP-75198– Rev. 1.2
7.3.4 Command error display and solutions
Following are command error descriptions and possible solutions during printer operations.
Command errors are displayed when an error has occurred while converting the command data sent from
computer to printer.
If a command error occurs, the following error messages are displayed and the printer stops.
Solve the problem to delete the error message and restart the printer.
N° Message Descriptions Solution Reference
1 command status
MH** Error [ ]
Invalid command data is
sent from computer.
Make sure that the settings of
the computer and the printer
match.
Refer to Menu
Overview
Notes
*** In error messages are code numbers indicating what kind of error occurred.
[ ] may indicate the command code of the error.
For the settings on a computer, refer to the computer's operation manual.