User`s guide

User’s Guide Rockhopper 3 Extreme
CHAPTER 6 : PRINTER MENU
120 AP-75198– Rev. 1.2
6 .5.6 .3 Ta nkch a ng em enu
Change the waste fluid tank. Set when changing the waste fluid tank.
Notes
Refer to "Replacing the waste bottle" for details regarding the procedure for changing the waste fluid tank.
Setup items Parameters Description
Tank change Cancel Do not change the tank.
Enter When tank has been changed.
-  [CANCEL] key: shifts to the previous hierarchy menu.
6 .5.6 .4 Tubing F lush m enu
Follow the instructions below to flush the tubings.
Step 1 : The head will unlock and following message will be displayed:
Step 2 : Wait until the pumps start operating.
Step 3 : Open the front cover.
Step 4 : Inject appropriate cleaning liquid in the caps by way of a pipette until the caps do not change
colour.
Step 5 : When done, press the ENTER key to END the TubingFlush
Step 6 : Close the front cover.