User`s guide

User’s Guide Rockhopper 3 Extreme
CHAPTER 6 : PRINTER MENU
117 AP-75198– Rev. 1.2
6 .5.5.6 I nkC h a ng em enu
Change the ink configuration (from 2x4 to 1x6 or opposite).
Setup items Parameters Description
Ink Change No Do not perform an ink change.
Yes To start the ink change cycle.
-  [CANCEL] key: shift to the previous hierarchy menu.
Notes
To reduce the consumption of ink and cleaning liquid it is recommended to change ink types by using the
Ink Change cycle.
The process consists of several cleaning loadings, several air loadings and one ink loading. On the display
of the operation panel a time indication is mentioned on the fourth line.
Message Time
1. Please remove cart. (*)
2. Ink Discharge (*) 1
3. Please insert Cleaning cart (*)
4. During washing wait for a while (*) 5
5. Remove cassettes
6. During washing wait for a while 6
7. Please insert ink cart.
8. Ink refill 9
9. The end
(*) = This will be asked 5 times.
6 .5.5.7 I nkS upplym enu
For future use only.
Important
Leave this setting to “OFF”
Setup items Parameters Description
InkSupply Off Using ink cassettes
On For future use only
-  [CANCEL] key: shifts to the previous menu.