User`s guide

User’s Guide Rockhopper 3 Extreme
CHAPTER 6 : PRINTER MENU
116 AP-75198– Rev. 1.2
6 .5.5.3 H ea dW a sh m enu
To perform a head wash to remove all ink of the ink supplying system.
Setup items Parameters Description
Head clean No Do not wash the ink supplying system.
Yes To wash the ink supplying system.
-  [CANCEL] key: shift to the previous hierarchy menu.
Notes
Only after two head wash cycles it is possible to change ink types. Use the Ink Load to load ink
The process consists of several cleaning loadings, several air loadings and one ink loading. On the display
of the operation panel a time indication is mentioned on the fourth line.
Message Time
1. Please remove cart.
2. Ink Discharge 6
3. Please insert Cleaning cart
4. During washing wait for a while 22
5. Remove cassettes
6. During washing wait for a while 6
7. The end
8. Ink Load 9
6 .5.5.4 D isch a rg em enu
Setup items Parameters Description
Discharge Pump 1 Discharge ink into head 1 and 2
Pump 2 Discharge ink into head 3 and 4
ALL Discharge ink for complete system
-  [CANCEL] key: shift to the previous hierarchy
menu.
6 .5.5.5 InkLoa dm enu
Start and stop an ink load.
Setup items Parameters Description
Ink Load Pump 1 Load ink into head 1 and 2
Pump 2 Load ink into head 3 and 4
ALL Load ink for complete system
-  [CANCEL] key: shift to the previous hierarchy menu.