User`s guide

User’s Guide Rockhopper 3 Extreme
CHAPTER 6 : PRINTER MENU
112 AP-75198– Rev. 1.2
6 .5.4.19 Rena m em enu
To change file name of printing data saved in the hard disk.
Notes
Re-name menu is displayed if a hard disk has been installed.
The file name of printing data sent from the computer is always set to "TEMPFILE000".
To save transmitted image data, change the file name to a name of your choice in the Rename folder
before transmitting the next printing data.
Setup items Parameters Description
To-be-changed
file name
Characters you want to change To select characters you want to change by operating
the following keys.
[F1] key: To select characters you want to
change with back feed way.
[F3] key: To select characters you want to
change with forward feed way.
Characters you can use are :
A-Z or 0-9
To select to-be-changed characters by operating
following keys.
[F2] key: Selects to-be-changed characters with
back feed way.
[F4] key: Selects to-be-changed characters with
forward feed way.
-
[ENTER] key: Confirms the new value, shifts to
the previous hierarchy menu.
[CANCEL] key: Cancels setup value, shifts to the
previous hierarchy menu.