User`s guide

User’s Guide Rockhopper 3 Extreme
CHAPTER 6 : PRINTER MENU
102 AP-75198– Rev. 1.2
6.5.3 Setup Menu 3/7
6 .5.3.1 RollM edia setup m enu
Perform various settings for roll media.
Setup items Parameters Description
Roll media setup Disable Set this when roll media setup is not used.
Roll media 1 For each setup value of roll media, 3 settings of "Roll media 1" - "Roll
media 3" can be set.
Roll media 2
Roll media 3
-  [CANCEL] key: To shift to the previous hierarchy menu.
6 .5.3.2 Rollm edia leng th m enu
Set media roll length.
Setup items Parameters Description
Roll media 1-4 1 m to <30 m>to 99 m To change roll media length by operating the
following keys.
 [F2] key: to increase the setup value.
 [F4] key: to decrease the setup value.
 [ENTER] key: to confirm the setup value
 [CANCEL] key: to cancel the setup value
6 .5.3.3 C entronicsm enu
Set communication mode to Centronics interface.
Setup items Parameters Description
Centronics Centronics To set communication mode to Centronics mode.
<Bi Centro> To set communication mode to Bi-Centronics mode.
- To shift to the previous hierarchy menu.