User`s guide

User’s Guide Rockhopper 3 Extreme
CHAPTER 6 : PRINTER MENU
101 AP-75198– Rev. 1.2
6 .5.2.17 C utting position M enu
Set the media cutting position after printing has been finished.
Setup items Parameters Description
Cutting position Standard To cut the media to fit the media width, so that it meets the regulated size.
<Data> To cut the media according to the size of the printing data.
- - Shifts to the previous hierarchy menu.
6 .5.2.18 F unction setup m enu
Perform various settings for processing of printing data.
Setup items Parameters Description
Function setup CMY K Makes settings for printing method to present black.
Scale Sets the enlargement and reduction ratios for printing data.
Mirror To draw reversed printing data.
-  [CANCEL] key: Shifts to the previous hierarchy menu.
6 .5.2.19 C M Y K m enu
Replace CMY values with K (black)
Setup items Parameters Description
CMY K <No>  If MH-GL, GL2 are set on the Command Settings menu, be sure to use
CMY (mixed colours) ink.
 If RTL-PASS is set, use both CMY (mixed colours) ink and K (black) ink.
Yes Always use K (black) ink.
- To shift to the previous hierarchy menu.