Instruction manual

Operation Instructions Rockhopper 3 Extreme
CHAPTER 4 : PERIODICAL MAINTENANCE
32
AP-77150 – Rev. 2.0
4.1.1.3 Cleaning the wipers
Step 1 : Power ON the printer and go to the “WiperClean-Menu”, DON’T press enter when in it.
This will cause the unlocking of the carriage.
Step 2 : Clean the wipers (3) with a polyknit wiper (2), use some Eco solvent cleaning liquid to remove
drops of ink.
Caution
•
It is recommended to wear gloves as shown on the picture below.
Step 3 : Press the [ENTER] key in the active display (=WiperClean menu)
The head will cap in and be locked.
4.1.2