Instruction manual

Operation Instructions Rockhopper 3 Extreme
CHAPTER 4 : PERIODICAL MAINTENANCE
30
AP-77150 – Rev. 2.0
4.1.1 Weekly Maintenance
4.1.1.1 Clean the edges of the caps and the area around the caps
Step 1 : Power ON the printer and go to the “WiperClean-Menu”, DON’T press enter when in it.
This will cause the unlocking of the carriage.
Step 2 : Clean the edges of the caps with the cleaning swab, if necessary use some Eco solvent cleaning
liquid.
Step 3 : Clean the area around the caps with a polyknit wiper.
Step 4 : Press the [ENTER] key in the active display (=WiperClean menu)
The head will cap in and be locked.