Instruction manual

Operation Instructions Rockhopper 3 Extreme
CHAPTER 4 : PERIODICAL MAINTENANCE
29
AP-77150 – Rev. 2.0
4 PERIODICAL MAINTENANCE
4.1 DONE BY END USER
This section describes the periodical services required for this machine. The periodical services ensure
stable printout quality of the machine. In the periodical services, some service parts may be checked,
cleaned, or replaced.
Perform periodical inspections according to the table below.
No Action Months
1 Clean wipers
weekly
2 Clean the edges of the caps in maintenance station
3 Clean the area around the caps
4 Clean around bottom of the heads
5 Replace spitting box sponge
monthly
6 Change the wipers
7 Change absorbent behind maintenance station every 6 months
Notes
• All cleaning in “Ink areas” must be done with Eco-Solvent Ultra cleaning.
• Above maintenance cycle is based on use:
8 hours / day, 5 days / week and 44 weeks / year.
If machine is used more, maintenance periods will come earlier.
Available kits for the end user and their order numbers
1.
User and good shape kit for 6 months KY-80300
No
Description
Quantity
1
Sponge plate
1
2
Wipers
24
3
Spitting box sponge
6
4
Cleaning Liquid 250 ml
2
5
Instruction sheet
1
6
Good shape kit
1
2.
Good shape kit KY-80305
No
Description
Quantity
1
Gloves
100
2
Pipette
20
3
Swabs
50
4
Polyknit wiper
300
3.
Eco-Solvent Ultra cleaning in a 250 ml bottle
CL-90250