Instruction manual

Operation Instructions Rockhopper 3 Extreme
CHAPTER 3 : BASICS
22
AP-77150 – Rev. 2.0
Step 7 : Make measurement settings in following menu:
SetupMenu (1/7) ► MediaSet [F4] ► SheetSize
Menu Choice Description
F1
Auto Media measurement sequence ► REAR – RIGHT – LEFT – TOP
F2
Length
Media measurement sequence ► RIGHT – LEFT – TOP
Media orientation
F3
Width
Media measurement sequence ► RIGHT – LEFT – TOP
Media orientation
Step 8 : Close the front cover.
Step 9 : Start media initialisation.
Menu Choice Description
F2
Sheet / Roll Select which kind of media is loaded
F3
Lever Up Raise the pressure rollers if necessary
F4
User 1-8 Select user profile (1-8)
ENTER
Start media initialization
Step 10 : Media will be measured according to the settings made before.
Step 11 : If the media has been loaded correctly, the following message will be displayed: