Instruction manual

Operation Instructions Rockhopper 3 Extreme

CHAPTER 3 : BASICS

AP-77150 – Rev. 2.0

3.3 LOADING MEDIA

3.3.1 Loading

Please refer to the User’s Guide of the Unwinder/Winder 100 or the T- winder to know how to load roll

media.

roll media

3.3.2 Loading sheet media

To load sheet media, follow the steps below.

Step 1 : Power ON the printer.

Step 2 : Unload media if necessary.

Step 3 : Be sure that the pressure rollers are raised before loading sheet media.

Step 4 : When no media is loaded and …

… the pressure rollers are raised, the following message will be displayed.

… the pressure rollers are lowered, the following message will be displayed.

Step 5 : Open the front cover.

Step 6 : Load a sheet of media at the right side of the printer. Position the media next to the media setting

position (line of little holes in the media guide platform). The maximum distance between the

guideline and media is 5 mm.

Machine Minimum Media Width Maximum Media Width Printing Width

RH 3 - 65 Extreme A4 (210 mm – 8,27”) 1651 mm (65.00”) 1640 mm (64.56”)

RH 3 - 90 Extreme A4 (210 mm – 8,27”) 2240 mm (88.18”) 2230 mm (87.79’)