Instruction manual

Operation Instructions Rockhopper 3 Extreme
CHAPTER 2 : PRODUCT OVERVIEW
13
AP-77150 – Rev. 2.0
2 PRODUCT OVERVIEW
2.1 PART NAMES AND FUNCTIONS
Part names and functions are explained below.
2.1.1 Front
No Name Function
1
Heater plate Supports and heats the media during printing.
2
Front cover
Keeps the operator safe from the drive parts of the printer while it is
operating. Only open and/or close the cover to perform following
operations:
• Media setting and replacement
• Cutter blade replacement
•
Cleaning the cleaning wiper
3
Carriage Drives and holds the print heads.
4
Operation panel To control the printer.
5
Ink compartment cover Covers the ink compartment.
6
Stand Carries the main body.
7
Waste bottle assembly Collects the waste fluid.
8 Winder (
*
)
Rolls up the roll media.
9
Front tension system Keeps the media under tension.
10
Left maintenance covers Covers the maintenance areas.
(*)
Only a 90” model comes standard with an Unwinder/Winder 100 system. For a 65” model, one has to choose between a Tensioning
winder 30
or an Unwinder/Winder 100.