Specifications

4 Part Replacement PJ-1614NXE PJ-2216NXE Maintenance Manual

4-42

4.5.8 Replacing Cover R Sensor Assembly and Cover L Sensor

Assembly

NOTE

Before replacing the cover R sensor assembly and cover L sensor assembly, remove the following covers.

• Side cover R: "4.2.1 Removing Side Cover R"

• Side cover L: "4.2.2 Removing Side Cover L"

• Front cover: "4.2.3 Removing Front Cover"

• Y-axis rail cover: "4.2.5 Removing Y-axis rail cover"

(1) Replacing cover R sensor assembly

1. Disconnect the cover R sensor assembly connector from the MAIN board assembly.

2. Remove the two screws retaining the cover R sensor assembly.

3. Replace the cover R sensor assembly.

4. To install the removed components, reverse the removal procedure.

(2) Replacing cover L sensor assembly

1. Disconnect the cover L sensor assembly connector

No. Part name

1 Cover R sensor assembly

2 Screw retaining cover R sensor assembly (M2×10)