Specifications

PJ-1614NXE PJ-2216NXE Maintenance Manual 4 Part Replacement
4-41
8. Remove the two screws retaining the tube holder1.
9. Remove the two screws retaining the cable holder1.
10. Replace the ink tube.
11. Replace the tube guide.
12. Replace the CR tape wire.
13. Replace the steel bearer.
14. To install the removed components, reverse the removal procedure.
No. Part name
1 Cable clamp
2Tie wrap
No. Part name
1 Tube holder 1
2 Tube holder 1-retaining screw, cable holder1-retaining screw (M3×8)
3 Cable holder1
2
1
2
3
2
1