Specifications

4 Part Replacement PJ-1614NXE PJ-2216NXE Maintenance Manual
4-40
2. Remove the CR tape wire from the CR-BASE board assembly and SUB board assembly.
3. Remove the two screws retaining the steel bearer.
4. Remove the two screws retaining the cable holder 2.
5. Remove the one screw retaining the tube holder 2.
6. Remove the intake tube from the mini fitting.
7. Remove all cable clamps and tie wraps.
No. Part name
1 Steel belt
2 Steel belt-retaining screw, tube holder 2-retaining screw (M3×8)
3 Cable holder 2
4 Tube holder 2
No. Part name
1 Ink tube
2 Mini fitting
1
3
2
2
4
1
2
2
1