Specifications

PJ-1614NXE PJ-2216NXE Maintenance Manual 4 Part Replacement

4-31

4. Disconnect the connector from the transmission type photo sensor.

5. Replace the transmission type photo sensor.

6. To install the removed components, reverse the removal procedure.

(2) Replacing transmission type photo sensor (CR origin side)

1. Move the carriage leftward from the capping position.

2. Remove the transmission type photo sensor from the ORG sensor bracket.

3. Disconnect the connector from the transmission type photo sensor.

4. Replace the transmission type photo sensor.

5. To install the removed components, reverse the removal procedure.

No. Part name

1 Sensor bracket

2 Connector

3 Transmission type photo sensor

No. Part name

1 ORG sensor bracket

2 Connector

3 Transmission type photo sensor