Specifications

4 Part Replacement PJ-1614NXE PJ-2216NXE Maintenance Manual

4-30

8. To install the removed components, reverse the removal procedure.

4.4.6 Replacing Transmission Type Photo Sensor

NOTE

Before replacing the transmission type photo sensor, remove the following covers.

• Side cover R: "4.2.1 Removing Side Cover R"

• Side cover L: "4.2.2 Removing Side Cover L"

• Front cover: "4.2.3 Removing Front Cover"

• Y-axis rail cover: "4.2.5 Removing Y-axis rail cover"

(1) Replacing transmission type photo sensor (Lever motor side)

1. Remove the one screw retaining the sensor bracket.

2. Remove the sensor bracket.

3. Remove the transmission type photo sensor from the sensor bracket.

No. Part name

1 Sensor bracket

2 Sensor bracket-retaining screw (M3×8)