Specifications

PJ-1614NXE PJ-2216NXE Maintenance Manual 4 Part Replacement
4-29
3. Using a circuit tester, identify which heater is broken.
4. Replace the broken heater.
5. Disconnect the thermister assembly connector.
6. Remove the hexagon nut retaining the thermister assembly.
7. Replace the thermister assembly.
8. To install the removed components, reverse the removal procedure.
(2) Replacing heater and thermister assembly (Paper guide F side)
1. Remove the paper guide F following the instructions in "4.2.6 Removing Paper Guide F".
2. Disconnect the heater connector.
3. Using a circuit tester, identify which heater is broken.
4. Replace the broken heater.
5. Disconnect the thermister assembly connector.
6. Remove the hexagon nut retaining the thermister assembly.
7. Replace the thermister assembly.
No. Part name
1 Platen
2Heater
3 Hexagon nut
4 Thermister assembly
No. Part name
1 Paper guide F
2Heater
3 Hexagon nut
4 Thermister assembly
1
4
2
3