Specifications

4 Part Replacement PJ-1614NXE PJ-2216NXE Maintenance Manual
4-28
4.4.5 Replacing Heater and Thermister Assembly
NOTE
Before replacing the heater and thermister assembly, remove the following covers.
• Side cover R: "4.2.1 Removing Side Cover R"
• Side cover L: "4.2.2 Removing Side Cover L"
• Front cover: "4.2.3 Removing Front Cover"
• Y-axis rail cover: "4.2.5 Removing Y-axis rail cover"
(1) Replacing heater and thermister assembly (platen side)
1. Remove the following screws retaining the plmainaten.
• Screw (M3×8): 1
• Platen-retaining screw: 7
2. Disconnect the heater connector.
No. Part name
1 Platen
2 Screw retaining platen (M3×8)
3 Platen-retaining screw
1
3
2
3
3
1
4
2