Specifications

4 Part Replacement PJ-1614NXE PJ-2216NXE Maintenance Manual
4-24
7. Replace the PF_ENC assembly.
8. To install the removed components, reverse the removal procedure.
4.4.3 Replacing P_REAR_R sensor assembly
NOTE
Before replacing the P_REAR_R sensor assembly, remove the following covers.
• Side cover R: "4.2.1 Removing Side Cover R"
• Side cover L: "4.2.2 Removing Side Cover L"
• Front cover: "4.2.3 Removing Front Cover"
• Y-axis rail cover: "4.2.5 Removing Y-axis rail cover"
• Paper guide R: "4.2.7 Removing Paper Guide R"
1. Remove the P_REAR_R sensor assembly connector from the MAIN board assembly.
2. Remove the one screw retaining the paper sensor bracket.
No. Part name
1 PF_ENC assembly
2 Screw retaining PF_ENC assembly to PF encoder bracket. (M2×6)
3 PF encoder bracket