Specifications

PJ-1614NXE PJ-2216NXE Maintenance Manual 4 Part Replacement

4-23

4.4.2 Replacing PF_ENC Assembly and PF Scale Assembly

NOTE

Before replacing parts of the PF_ENC assembly, remove the following covers.

• Side cover R: "4.2.1 Removing Side Cover R"

• Side cover L: "4.2.2 Removing Side Cover L"

• Front cover: "4.2.3 Removing Front Cover"

• Y-axis rail cover: "4.2.5 Removing Y-axis rail cover"

1. Disconnect the PF_ENC assembly connector.

2. Remove the bearing.

3. Remove the four screws retaining the PF scale bracket.

4. Remove the PF scale bracket.

5. Remove the PF scale assembly.

6. Remove the screws retaining the PF_ENC assembly to the PF encoder bracket.

No. Part name

1Bearing

2 PF scale bracket-retaining screw (M3×6)

3 PF scale