Specifications

4 Part Replacement PJ-1614NXE PJ-2216NXE Maintenance Manual

4-20

3. Remove the eight POWER A board assembly-retaining screws.

4. Replace the POWER A board assembly.

5. To install the removed components, reverse the removal procedure.

(3) Replacing DC power supply assemblies

1. Disconnect the connectors from the respective DC power supply assemblies.

2. Remove the screws retaining the respective DC power supply assemblies (32 screws).

No. Part name

1 POWER A board assembly-retaining screw (M3×6)

No. Part name

1 DC power supply assembly-retaining screw (M3×6)

2 Power supply (5V/5W)

3 Power supply (24V/30W)

4 Power supply (48V/100W)

5 Power supply (5V/50W)

6 Power supply (12V/50W)

7 Power supply (24V/150W)

8 Power supply (48V/75W)