Specifications

4 Part Replacement PJ-1614NXE PJ-2216NXE Maintenance Manual
4-14
2. Remove the nine SUB board assembly-retaining screws.
3. Replace the SUB board assembly
4. To install the removed components, reverse the removal procedure.
4.3.2 Replacing MAIN Board Assembly, DIMM, MOTHER Board
Assembly, HDD_MOTHER Board Assembly
1. Remove the SUB board assembly following the instructions in "4.3.1 Replacing SUB Board
Assembly".
2. Replace DIMM.
3. Disconnect the connectors shown in the table below from the MAIN board assembly.
18 J018 8 White
17 J019 16 White Blower fan
18 J020 12 White POWER B board
19 J021 30 White TERM_POMP board Lock type
20 J022 8 White Thermister
21 J023 9 White Thermister
22 J024 40 White TERM_TANK Lock type
No. Part name
1 SUB board assembly-retaining screw (M3×6)
Table 4-2 Connectors to SUB Board Assembly (Continued)
No. Connector No. # of pins
Colo
r
Connect to Remark