Specifications

PJ-1614NXE PJ-2216NXE Maintenance Manual 4 Part Replacement

4-7

8. Remove the panel board assembly.

4.2.5 Removing Y-axis rail cover

1. Remove the side cover R.

2. Remove the side cover L.

3. Remove the front cover.

4. Remove the six front screws from the Y-axis rail cover.

5. Remove the five rear screws from the Y-axis rail cover.

NOTE

If your machine is an 87-inch model, the Y-axis rail cover has seven rear screws.

No. Part name

1 Screw retaining panel board assembly to panel bracke

(M3×8)

No. Part name

1 Front screw of Y-axis rail cover (M4×8)