Specifications

PJ-1614NXE PJ-2216NXE Maintenance Manual 4 Part Replacement
4-1
4 Part Replacement
4.1 Introduction
This chapter provides information on removal and replacement of service parts.
WARNING
Before starting part replacement, always perform the following operations.
•
••
• Turn OFF the machine power.
•
••
• Disconnect the power plug from the outlet.
Otherwise, you may suffer electric shock or the system circuit may be damaged.
•
••
• Disconnect any cables connected to the machine.
Otherwise, the machine may malfunction.
CAUTION
The components in the machine can be disassembled only if so instructed in this
manual. The frame components and other components that are not mentioned as
serviceable in the manual shall not be disassembled.
The machine has been assembled in our factory with extremely high precision up
to 1/100mm. If disassembled inappropriately, it may not restore its normal
functionality.
NOTE
After replacing any parts, perform necessary lubrication and bonding following the instructions in section "8.4
Lubrication/Bonding".
4.2 Removal of Covers
Before replacing any parts in the machine, you must remove some external covers.
This section describes the procedure to remove the covers.
Table 4-1 Cover Component List
No. Part name
1 Side cover R
2 Side cover L
3 Front cover