Specifications

PJ-1614NXE PJ-2216NXE Maintenance Manual 3 Specifications
3-5
(3) Recommended centronics cable specifications
3.3.2 Network Interface (Optional) Specifications
12 P ERROR From printer→ 30 SG
13 SELECTED From printer→ 31 INIT To printer←
14 AUTOFD To printer← 32 FAULT From printer→
15 Not connected 33 Not connected
16 SG 34 Not connected
17 FG 35 Not connected
18 +5V 36 SELECTIN To printer←
Item Specifications
Interface Dual-direction Parallel Interface:IEEE1284
Structure AWG28×18 (twisted pair wiring)
Shield construction Metallic tape+weaving(double shielded cable)
Characteristic
impedance
62Ω
Item Specifications
NetWork Type Ethernet IEEE802.3
NetWork I/F 10 Base-T,100 Base-TX(automatic switching)
(RJ-45 connector,twisted pair cable,category 5)
Protocol TCP/IP NetWare(V3.1) EtherTalk
Mode • ftp
• lpr
• socket
• remote printer mode
• print server
• printer name
• zone name
Functions • Automatic protocol recognition
• Transmission speed up to 330 KB/s (differs according to networking environment)
• IP address and other settings are enabled by the accessory utility software (Printset) and
general browser software
Pin
number
Connection signal Signal direction
Pin
number
Connection signal Signal direction