Specifications

3 Specifications PJ-1614NXE PJ-2216NXE Maintenance Manual
3-2
3.2.2 PJ-2216NXE Unit specifications
Environmental
conditions
Operation
environment
Temperature: 18°C(64.4F) to 32°C(89.6F), Humidity 30%-70%, without
condensation
Storage environment Temperature: -10°C(14F) to 60°C(140F), Humidity 30%-70%, without
condensation (with ink empty)
Power source Voltage AC100V-120V+/-10% / AC220V-240V +/-10% Automatic Switching
Frequency 50Hz / 60Hz±1Hz
Fuze (F01, F02) Fuze pipe dimension φ10.31×38.1mm
Voltage 250V
Current 20A
Power consumption When Printing 1100VA or less (when the heater is on)
When in standby 200VA or less
Outer diameter
dimensions
Height 1227mm(48.3in.)
Width 3018mm(118.8in.)
Depth 720mm(28.3in.)
Mass 228kg(50.3Lbs.)
Item Specifications
Model name PJ-2216NXE
Printing method Piezo inkjet
Drive method Firmware servo/DC motor drive
Media feed method Multi-point pressure grid roller method
Media fixing method Pressurizing roller auto-down method
Media supply and discharge Back feeding/front paper discharge
Feed unit Automatic/Manual
Roll paper specifications External: 250mm(10.0in.) or less, weight 100kg(220Lbs.) or less.
Max. media width 2210mm(87.0in.)
Max. print width 2159mm(85.0in.)
printing margins Front: 100mm, Back: 0-50mm, Left: 25.4mm, Right: 25.4mm
Media cut method Manual cut
Head height adjustment Three levels: Low/Normal/High
CPU 64Bit RISC CPU,
Memory 128MB
Commands MH-RTL (RTL-PASS)
Interface • Standard: bi-directional centronic method (IEEE1284 compliant;
compatible, nibble, ECP mode)
• Optional: Network Interface
Item Specifications