Specifications

10 Appendix PJ-1614NXE PJ-2216NXE Maintenance Manual
10-2
10.3 Jig and Tool List
This section provides lists of jigs and tools required for service operations.
10.3.1Required Tools
(1) Tools for part replacement
(2) Tools for adjustment
Table 10-1 Tools for Part Replacement
No. Tool Part code Remark
1 Philips driver No.2 Generic product Shaft length should be 250mm or more.
2 Philips driver No.2 Generic product Shaft length should be 50mm or less.
3 Philips driver No.1 Generic product
4 Flat-head driver Generic product
5 Ratchet Generic product
6 Pliers Generic product
7 Tweezers Generic product
8 Hexagon wrench set Generic product
Table 10-2 Tools for Adjustment
No. Tool Part code Remark
1 Personal computer Generic product
2 Tension gauge Generic product Max. capacity should be 4000g.
3 Tension gauge Generic product Max. capacity should be 500g.
4 Y-axis tension attachment JD-42050
5 Flash memory card Generic product Spec.:
4MBFlash Memory Card
Type-II(PCMCIARel.2.1/JEIDAVer.4.2)
6 Marking film (TBD) For adjusting drawing accuracy
7 Straight scale (1000mm) Generic product
8 PF_ENC locating jig (TBD)
9 Platen height adjusting jig (TBD)