Specifications

2 Product Overview PJ-1614NXE PJ-2216NXE Maintenance Manual

2-4

2.3.2 Rear section (PJ-1614NXE)

10 Maintenance cover This is a cover to protect the user from the internal components of the unit. This is

opened during the following conditions:

• When turning the unit ON or OFF

• When cleaning the print head surface.

• When cleaning the print head

Inside the cover, there is a waste fluid tray to collect waste fluid from the print head.

11 Waste fluid tank A tank for storing waste fluids discharged from the product.

12 Waste fluid valve Opened when discharging waste fluid from the waste fluid tank. This is normally

closed.

13 Stand This stand is used to install the printer on a surface flat floor.

14 Winding unit Winds and collects the printed media.

No. Name Function

1 AC inlet The power cable plug is inserted here.

2 Interface connector A connector to connect the centronic interface

3 Foot switch connector A connector to attach the foot switch cable

4 Interface slot The network interface board (option) attaches here.

When not using the network interface, keep the cover closed.

5 Hard disk slot The hard disk (optional) attaches here. When not using a hard disk, keep the cover

closed.

No. Name Function

5 3 1 6

7 8