Specifications

PJ-1614NXE PJ-2216NXE Maintenance Manual 9 Troubleshooting
9-35
(10) CR_HEAD assembly
may be malfunctioning.
ÅEReplace CR_HEAD assembly
4.7.2
Replacing
CR_BASE
Board Assembly
and CR_HEAD
Board Assembly
(11) SUB board assembly
may be malfunctioning.
ÅEReplace SUB board assembly
4.3.1
Replacing SUB
Board Assembly
(12) MAIN board assembly
may be damaged.
ÅEReplace MAIN board
assembly.
4.3.2
Replacing MAIN
Board Assembly,
DIMM,
MOTHER Board
Assembly,
HDD_MOTHER
Board Assembly
12 Printout borders blur. (1) Does purge correct
symptom?
ÅEPerform purge twice
consecutively.
Operation
manual
(2) Is paper in use a
recommended one?
ÅESet recommended paper and
check printout again. With non-
authorized paper, paper sensor
may fail to detect paper correctly.
Operation
manual
(3) CR cable may be damaged ÅEReplace CR tape wire.
4.5.7
Replacing Steel
Bearer, Tube
Guide, CR Tape
Wire, and Intake
Tube
(4) Is head assembly
damaged?
ÅEReplace damaged head
assembly.
4.6.2
Replacing Head
Assembly
(5) CR_HEAD assembly may
be malfunctioning.
ÅEReplace CR_HEAD board
assembly
4.7.2
Replacing
CR_BASE
Board Assembly
and CR_HEAD
Board Assembly
(6) SUB board assembly may
be malfunctioning.
ÅEReplace SUB board assembly
4.3.1
Replacing SUB
Board Assembly
(7) MAIN board assembly
may be damaged.
ÅEReplace MAIN board
assembly.
4.3.2
Replacing MAIN
Board Assembly,
DIMM,
MOTHER Board
Assembly,
HDD_MOTHER
Board Assembly
Table 9-10 Symptoms, Check Items and Actions for Drawing Problems (Continued)
No. Symptom Check item Action Reference