Specifications

PJ-1614NXE PJ-2216NXE Maintenance Manual 2 Product Overview

2-3

2.3.1 Front

No. Name Function

1 Operation panel This panel is used to set operational conditions, the status of the printer, and other

functions.

2 Main tank Container for holding the ink and the jet wash fluid. The following are attached to the

tank tray for each.

• PJ-1614NXE: 5 bottles

• PJ-2216NXE: 7 bottles

3 Tank tray Used to attach the main tank to the product.

4 Front cover This cover keeps the operator safe from the drive parts of the printer while it is

operating. Open and/or close the cover only when performing the following

operations.

• Media setting and replacement

• Cutter blade replacement

• Clearing cleaning wiper

• media jamming

5 Pressurizing roller This roller is used to press the media from above and keep it flat when printing.

6 Platen Set inside the front cover. A heater for drying ink is built in. On the surface, there is a

cutter groove for paper cutting.

7 Media guide This is used to feed the media smoothly when setting the media and when printing.

There is a ink drying device built in.

8 Foot switch This switch is used to raise and lower the pressurizing roller.

9 Valve cover This is a cover to protect the user from the internal components of the unit. It is opened

when cleaning the print head or the sub-tank, and is normally closed.

1910

4 4