Specifications

9 Troubleshooting PJ-1614NXE PJ-2216NXE Maintenance Manual
9-30
9.3.3 Drawing Problems
Table 9-10 Symptoms, Check Items and Actions for Drawing Problems
No. Symptom Check item Action Reference
1 Machine cannot draw
sequentially
(1) Program ROM may be
defective.
ÅEUpdate firmware.
7.4
Firmware
Installation
(2) MAIN board assembly
may be damaged.
ÅEReplace MAIN board
assembly.
4.3.2
Replacing MAIN
Board Assembly,
DIMM,
MOTHER Board
Assembly,
HDD_MOTHER
Board Assembly
2 Paper feed after printout is
excessive.
(1) Is P_REAR sensor
assembly judged as normal
when checked through "Test:
Sensor" of self-diagnosis
function?
ÅEReconnect MAIN board
assembly connector J117.
ÅEReplace P_REAR sensor
assembly.
4.3.2
Replacing MAIN
Board Assembly,
DIMM,
MOTHER Board
Assembly,
HDD_MOTHER
Board Assembly
4.4.3
Replacing
P_REAR_R
sensor assembly
(2) Program ROM may be
defective.
ÅEUpdate firmware.
7.4
Firmware
Installation
(3) MAIN board assembly
may be damaged.
ÅEReplace MAIN board
assembly.
4.3.2
Replacing MAIN
Board Assembly,
DIMM,
MOTHER Board
Assembly,
HDD_MOTHER
Board Assembly
3 Missing dots in printout. (1) Perform purge twice
consecutively.
Operation
manual
(2) Perform "Drawing:
Nozzle check" of self-
diagnosis function or test
drawing.
ÅEIf nozzle check patterns are
printed out correctly: step (4)
5.5.8 Test
Drawing Menu