Specifications

PJ-1614NXE PJ-2216NXE Maintenance Manual 9 Troubleshooting
9-9
9.2.3 Data Errors
This section describes the message contents of data errors as well as the check items and corrective
actions.
These errors are displayed when a communication error occurs between the PC and the machine.
Upon an occurrence of a data error, the machine stops its operation at the same time.
The error can be cancelled by removing the error causes. After that, the machine will restart its operation.
NOTE
The square bracket pair in a message may contain the applicable command code.
9.2.4 Command Errors
This section describes the message contents of command errors as well as the check items and corrective
actions.
These errors are displayed when an abnormal condition is found during analysis of PC command data.
Upon an occurrence of a command error, the machine stops its operation at the same time.
The error can be cancelled by removing the error causes. After that, the machine will restart its operation.
Table 9-4 Symptoms and Check Items for Data Errors
No. Message
Event/
symptom
Check item Action Reference
1 I 15-1 error
command [ ]
Online frame
error
(1) Is there any error-
triggering statement in
drawing data?
(2) MAIN board assembly
may be defective.
ÅEReplace application
driver.
ÅEReplace MAIN board
assembly.
4.3.2
Replacing MAIN
Board Assembly,
DIMM,
MOTHER Board
Assembly,
HDD_MOTHER
Board Assembly
2 I 15-2 error
command [ ]
Overrun error
3 I 15-3 error
command [ ]
Online parity
error
4 I 15-4 error
command [ ]
Sum check error
5 I 15-5 error
command [ ]
ESC parameter
6 I 15-6 error
command [ ]
Undefined ESC
7 I 15-7 error
command [ ]
Unauthorized
character ESC
8 I 15-8 error
command [ ]
Numeral
character ESC
9 I 15-9 error
command [ ]
Parameter error
ESC
10 I 15-10 error
command [ ]
Buffer overflow