Specifications

PJ-1614NXE PJ-2216NXE Maintenance Manual 9 Troubleshooting
9-1
9 Troubleshooting
9.1 Introduction
This chapter provides information on possible causes of machine errors/damage and corrective actions.
If the machine is malfunctioning and an error message is displayed on the operation panel, refer to "9.2
Troubleshooting with Error Message". If the machine is malfunctioning but no error messages are
displayed, refer to "Troubleshooting without Error Message".
9.2 Troubleshooting with Error Message
This section describes the messages displayed in normal operation and upon an error occurrence as well
as how to correct the error.
The available messages are as follows.
Table 9-1 Error Message Type
Prio
rity
Message type Contents Reference
1 Operation status Displayed when the machine is operating normally.
9.2.1 Operation
Status
2 Error with message Displayed when an abnormal condition occurs during normal
operation.
9.2.2 Errors with
Message
3 Data error Displayed when a data communication error occurs between PC
and the machine.
9.2.3 Data Errors
4 Command error Displayed when an abnormal condition occurs during analysis of
PC commands.
9.2.4 Command
Errors
5 Error requiring reboot Displayed when a serious error critical to the machine operation
occurs.
9.2.5 Errors
Requiring Reboot