Specifications

PJ-1614NXE PJ-2216NXE Maintenance Manual 8 Maintenance
8-5
8.5 Transportation of Machine
This section describes how to transport the machine.
Before transporting the machine, you must package it in the same manner as it was delivered using
protective materials and packaging materials so that the machine will not be subject to excessive impact
and vibrations during the transportation.
Follow the steps below to package the machine.
(1) Task before transportation
1. Turn the machine power OFF.
2. Verify that the machine is in normal state.
3. Clean the printer heads following the instructions in "5.5.10 Head Cleaning Menu".
4. Clean the flushing box with jet wash.
5. Extract all waste fluid from the waste fluid tank.
6. Attach caps.
7. Remove all cables including the power cable.
8. Fit the machine with protective materials.
TIP
For details on protective materials, refer to the operation manual.
9. Package the machine.
(2) Task after transportation
1. Unpack, assemble, and install the machine.
2. Make the machine ready for operation.