Specifications

8 Maintenance PJ-1614NXE PJ-2216NXE Maintenance Manual
8-2
8.2 Periodical Services
This section describes the periodical services required for this machine.
The periodical services ensures stable printout quality of the machine.
In the periodical services, some service parts may be checked, cleaned, or replaced.
Perform periodical inspections according to "Table 8-1 Periodical Inspection Part List" and perform
cleaning and part replacement as necessary.
TIP
• For details of the cleaning procedure, refer to the operation manual.
• For the names and locations of the respective service parts, refer to "10.4 Exploded Views/Service Parts List".
Table 8-1 Periodical Inspection Part List
Part Timing Check point Action
Paper guide L
Platen surface
Several times in a year •Paper dust accumulation
•Foreign objects Foreign
objects
•Damages
Clean it.
NOTE
If ink deposits are present,
remove them with a
dampened cloth and wipe
the area with a clean dry
cloth.
Timing fence
(CR encoder detection slit
plate)
Several times in a year •Paper dust accumulation
•Foreign objects
•Damages
Clean it.
If any damages are found,
replace the part.
P_REAR sensor surface Several times in a year •Paper dust accumulation
•Foreign objects
Clean it.