Specifications

7 Adjustment PJ-1614NXE PJ-2216NXE Maintenance Manual
7-16
7.9 Platen Height Adjustment
This section describes the procedure to adjust the platen height.
7.9.1 Jigs and Tools
The jigs and tools required for platen height adjustment are as follows.
• Platen height-adjusting jig
TIP
For further details on the jigs and tools, refer to "10.3 Jig and Tool List".
7.9.2 Adjustment Procedure
Follow the steps below to adjust the platen height.
NOTE
Before adjusting the platen height, remove the following covers.
• Side cover R: "4.2.1 Removing Side Cover R"
• Side cover L: "4.2.2 Removing Side Cover L"
• Front cover: "4.2.3 Removing Front Cover"
• Y-axis rail cover: "4.2.5 Removing Y-axis rail cover"