Specifications

7 Adjustment PJ-1614NXE PJ-2216NXE Maintenance Manual
7-10
7.5 Steel Belt Tension Adjustment
This section describes the procedure to adjust the steel belt tension.
When you have removed and installed the steel belt, always adjust the belt tension.
7.5.1 Jigs and Tools
The following tools are required for steel belt tension adjustment.
• Tension gauge with max. capacity of 500g
TIP
For further details on the jigs and tools, refer to "10.3 Jig and Tool List".
7.5.2 Adjusting Steel Belt Tension
To adjust the steel belt tension, follow the steps below.
1. Press the center of the steel belt with a tension gauge.
TIP
The steel belt tension specifications are as follows.
• 64-inch model: 100g ± 10g
• 87-inch model: 120g ± 10g
2. If the measured tension is outside the specification, adjust the tension using the steel belt tension-
adjusting screw.
No. Part name
1 Steel belt
2 Tension gauge