Specifications

PJ-1614NXE PJ-2216NXE Maintenance Manual 7 Adjustment
7-9
3. Turn the machine power ON.
• The firmware installation starts
• The firmware installation takes about 60 seconds. During the installation process, the following
messages will appear on the LCD of the operation panel in order.
• "Erase"
• "Copy"
• "Compare"
• "End"
4. A buzzer sound signals that the firmware installation has finished correctly.
5. Turn the machine power OFF.
6. Remove the memory card for firmware installation.
7. Install the memory cover.
(2) Installation using a PC
1. Turn the machine power OFF as necessary.
2. Connect the machine and a PC with a
Centronics cable.
3. Press the Power key in the operation panel.
• All lamps light up for an instance.
4. Within one second after all lamps light up,
press the F2 key in the operation panel.
• The system enters the firmware installation
mode.
5. Transmit the new firmware data from the PC.
6. A buzzer sound signals that the firmware
installation has finished correctly.
7. Turn the machine power OFF.