Specifications

7 Adjustment PJ-1614NXE PJ-2216NXE Maintenance Manual
7-4
PF motor assembly 1 PF reduction belt tension adjustment
7.6 PF Reduction Belt
Tension Adjustment
2Skew check
5.5.1 Skew Check
Menu
3 Band feed correction
5.5.7 Band Feed
Correction Menu
4 Test drawing
5.5.8 Test Drawing
Menu
P_EDGE sensor assembly 1 Side margin adjustment
5.5.9 Side Margin
Menu
Cover sensor assembly 1 Cover sensor adjustment
7.8Cover Sensor
Adjustment
PF_ENC assembly 1 PF_ENC inspection
5.4.5 Encoder Menu
2 Band feed correction
5.5.7 Band Feed
Correction Menu
3 Test drawing
5.5.8 Test Drawing
Menu
Platen 1 Platen height adjustment
7.9 Platen Height
Adjustment
T fence 1 CR encoder inspection
5.4.5 Encoder Menu
2 Two-way printing position alignment
5.5.5 Two-Way
Printing Position Alignment
Menu
3 Test drawing
5.5.8 Test Drawing
Menu
CR driven pulley 1 Steel belt tension adjustment
7.5Steel Belt Tension
Adjustment
Table 7-1 Adjustment Part List (Continued)
Part replaced or adjusted
Adju
stme
nt
orde
r
Adjustment item Reference