Specifications

PJ-1614NXE PJ-2216NXE Maintenance Manual 7 Adjustment
7-3
MAIN board assembly 1 Parameter backup
7.3 Parameter Backup
2 Firmware installation
7.4 Firmware
Installation
3 Skew check
5.5.1 Skew Check
Menu
4 Voltage input (no need for initial ink charge)
5.5.2 Voltage Input
Menu
5 Head nozzle check
5.5.3 Head Nozzle
Check Menu
6 Head inclination check
5.5.4 Head Inclination
Check Menu
7 Two-way printing position alignment
5.5.5 Two-Way
Printing Position Alignment
Menu
8CW adjustment
5.5.6 CW Adjustment
Menu
9 Band feed correction
5.5.7 Band Feed
Correction Menu
10 Side margin
5.5.9 Side Margin
Menu
11 Test drawing
5.5.8 Test Drawing
Menu
CR motor assembly 1 Steel belt tension adjustment
7.5 Steel Belt Tension
Adjustment
2 Two-way printing position alignment
5.5.5 Two-Way
Printing Position Alignment
Menu
3 Side margin adjustment
5.5.9 Side Margin
Menu
4 Test drawing
5.5.8 Test Drawing
Menu
Table 7-1 Adjustment Part List (Continued)
Part replaced or adjusted
Adju
stme
nt
orde
r
Adjustment item Reference