Specifications

PJ-1614NXE PJ-2216NXE Maintenance Manual 7 Adjustment
7-1
7 Adjustment
7.1 Introduction
This chapter provides information on necessary adjustment items and procedures.
TIP
For jigs and tools necessary for adjustment, refer to "10.3 Jig and Tool List".
7.2 Adjustment Item
This section describes the adjustment items required in part replacement procedures.
When you adjust or replace any of the service parts listed in "Table 7-1 Adjustment Part List", you must
always adjust the printout quality using the self-diagnosis function referring to "Table 7-1 Adjustment
Part List".