Specifications

6 Maintenance Manual PJ-1614NXE PJ-2216NXE Maintenance Manual

6-2

6.3 Operations in Maintenance Mode

This section explains how to start up and operate the maintenance mode as well as provides the list of

available diagnosis items.

6.3.1 Starting Up Maintenance Mode

To use the maintenance mode, you must first call up the maintenance menu on the operation panel.

The maintenance menu is completely independent of the normal operation mode and setup menu display

mode. To call up the maintenance menu, follow the steps below.

6.3.2 Operating Maintenance Mode

To learn how to operate in the maintenance mode, refer to "5.3 Operations in Self-Diagnosis Mode".

1. If the system is in the operation mode or the

setup menu mode, turn off the system power.

2. Press and hold the [F1] key, [F3] key, and

[Menu ] key simultaneously. While holding

down these keys, press [Power] key.

• The system will enter the maintenance mode

and display the maintenance menu.

F 1

F 3

F 2

F 4

ERROR

DATA

MEDIA SET

CANCEL ENTER

POWER

RECEIVE

PROCESS