Specifications

5 Self-Diagnosis Function PJ-1614NXE PJ-2216NXE Maintenance Manual
5-50
CAUTION
When performing the pump menu, always perform the ink discharge. If the ink is
not discharged there will be a possibility of the ink spraying out or reversing.
Ink discharge operation: "5.5.10 Head Cleaning Menu"
5.9.7 General Endurance Menu
This menu performs the general endurance running.
You can operate various driving systems according to your desired settings.
The available settings are shown below.
TIP
• In the General Endurance menu, the following operations are performed as one cycle of endurance running.
• Carriage stroking: 185 strokes
• Paper feed: 185 cycles
• Head U/D operation: 8 cycles
• If the number of endurance running cycles is set to -1, the units continuously repeat endurance running until a key
input is given from the operation panel.
• The maximum counter value for endurance running cycles is 99999999 (up to 8-digit number). If the number of
cycles exceeds the maximum value, the counter is reset to 0.
Table 5-18 Settings of the comprehensive endurance menu
Set item Contents Set value Remark
Paper feed amount Set the paper feed amount per
cycle
0 to 100 Unit: mm
Number of endurance running
cycles
Set the number of endurance
running cycles
-1 to 10000