Specifications

1 Safety Instructions PJ-1614NXE PJ-2216NXE Maintenance Manual
1-4
•
••
• Insure the power of the printer is OFF before performing the parameter
backup. Performing the parameter backup with the power ON may damage the
main substrate or the data may not be properly installed.
•
••
• Insure the power of the printer is OFF before installing the firmware. Installing
the firmware with the power ON may damage the main substrate assembly or
the data may not be properly installed.
•
••
• Insure there is sufficient space around the printer when performing
maintenance work.
•
••
• Maintenance must be done by more than one person for the following work.
•
••
• When detaching the printer from the stand or attaching it.
•
••
• When packing the printer for transportation.
1.4 Warning labels
The handling, attachment locations, and types of warning labels are explained below.
Warning labels are attached to areas where care should be paid. Read and understand the positions and
contents thoroughly before performing your work.
1.4.1 Handling the warning labels
Be sure to note the following when handling the labels.
NOTE
• Make sure that all labels can be recognized. If text or illustrations cannot be seen clearly, either clean or replace
the label.
• When cleaning labels, use a cloth with water or neutral detergent. Do not use a solvent or gasoline.
• If a warning label is damaged, lost, or cannot be recognized, replace the label.
1.4.2 Locations and types of warning labels
The locations of warning labels are shown below.