Specifications

PJ-1614NXE PJ-2216NXE Maintenance Manual 5 Self-Diagnosis Function
5-49
5.9.5 Sequential Drawing Endurance Menu
This menu performs endurance running for the printer heads.
You can operate the printer heads according to your desired settings. The available settings are shown
below.
TIP
• If the number of endurance running cycles is set to -1, the heads continuously repeat endurance running until a
key input is given from the operation panel.
• The maximum counter value for endurance running cycles is 99999999 (up to 8-digit number). If the number of
cycles exceeds the maximum value, the counter is reset to 0.
5.9.6 Pump Menu
The specified pump will be activated.
While the pump is activated, pressure adjustment of the specified pump is performed.
Table 5-17 Set Item in Sequential Drawing Endurance Menu
Set item Contents Set value Remark
Number of endurance running
cycles
Set the number of endurance
running cycles
-1 to 10000